Oil India Limited Chemist Job Vacancy – Salary Rs 1 Lakh pm
(ADVT.NO.HRAQ/CONT-EX-B/23-68 dated 21/03/2023)
Oil India Limited (OIL), a Navratna Public Sector Undertaking intends to engage following personnel purely on contractual basis for immediate engagement under Mahanadi Basin Project, Bhubaneswar. The contractual requirement which is purely temporary in nature shall also entail working in shifts involving arduous and hazardous nature of jobs in remote/far-flung OIL installations/locations and also on “On-Call” duty basis. Only Indian Nationals are eligible to apply on the date of registration.
Job Title: Contractual Chemist
No.of posts: 02 Nos.
Eligibility Criteria:
(i) Post Graduate in Chemistry of (02) Two years duration from a Govt. recognised
institute.
(ii) Post Qualification Work Experience of more than 05 (five) years in Preparation,
Maintenance and Supply of Water Base Drilling Fluid (Mud) in Drilling well.
OR
(i) Bachelors Degree i
n Chemical Engineering of four years duration froma Govt. recognised institute.
(ii) Post Qualification Work Experience of more than 07 (Seven) years in
Preparation, Maintenance and Supply of Water Base Drilling Fluid (Mud) in Drilling well.
Age:
Minimum age: 24 years
Upper age limit: 40 years as
on date of registration for
Walk-in-Interview.
Salary: ₹ 1,00,000/- per month
Note:
i). Reservation and age relaxation will be as per Government guidelines.
ii). Contract Period: Contractual engagement will be for a period of 01 (One) year, extendable by another 01 (One) year subject to a maximum period of 02 (Two) years. The said contract period will be extendable depending upon requirement of the company, performance of the individual, conduct, fitness etc.
iii). Age Limit: As on the date of registration for Walk-in-Interview for respective requirements.
Duty Responsibilities/Accountabilities of Contractual Chemist:
a) To be posted at Rig site under 21 days (minimum) ON/OFF duty pattern.
b) Duties shall include but should not be limited to managing and supervising drilling fluid properties both for Chemical and Physical treatment related to mud programme.
c) To liaise with Company Representative of OIL, Mud Engineering Personnel and Drilling Fluid Manager of Contractor as and when required.
d) To supervise the day to day well site operational activities of the contracts being served.
e) To maintain good customer relationship at the well site.
f) Supervise all mud treatment and ensure proper use and maintenance of solids control equipment.
g) Coordinate third party/sub-contractor services like Effluent Treatment Plant (ETP) services at the well site, TSDF (Treatment, Storage, and Disposal Facility) services and during well cementation job as and when required.
h) Forecast Material/ Chemical requirements for well site operations and liaise with Contractor Drilling Fluid Manager/Drilling Fluid Engineer to ensure timely purchase, preparation and delivery of sufficient stock.
i) Ensure that an adequate rig site chemical inventory and an accurate record of supply and consumption is maintained and reported according to company and contractual requirements.
j) Ensure provision of a complete, accurate and informative Daily Drilling Fluid Report in accordance with company procedures and contractual requirements.
k) Ensure provision of a complete, accurate and informative Well Summary Report (End of Well Report or Well History) in accordance with company procedures and contractual requirements.
l) Ensure proper inventory of testing equipment and chemical reagents is maintained and that all drilling fluid test equipment at well site is well maintained and regularly calibrated according to procedures.
m) Make regular contact with well site HSE Officer and Company Representative (Installation Manager) and attend all company and operator organized QHSE meetings.
n) Ensure correct and appropriate use of Chemicals, Services and Resources.
o) Ensure knowledge in solving downhole problem during Pipe stuck, Loss Circulation, Mud Loss and Well Kick at the rig.
p) Ensure implementation of the company’s Health Safety and Environmental Policies, Procedures and Quality Plans.
q) Maintain an active role in the identification of Opportunities for Improvement in the company’s Quality Health Safety and Environmental Management Systems and where relevant to assist in the implementation of these improvements.
r) Monitor the effectiveness of the company’s (and where appropriate the contractor’s) Quality, Health Safety and Environmental Management Procedures and ensure all legal and contractual requirements are fulfilled to the Company’s satisfaction.
Candidates must bring the following document(s)/certificate(s)/testimonial(s) in originals while reporting for the Walk-in-Interview process:
a) Filled in Personal Bio-Data Form (format given on the last 3 pages of this advertisement).
b) 01 (One) recent 3cm X 3cm coloured photograph.
c) Valid Identity Proof and valid Address Proof from Competent Government Authority.
d) Date of Birth (DOB) proof i.e., Birth Certificate or Class X certificate containing DOB.
e) Admit Card, Marksheet and Pass Certificate of Class 10 issued by the concerned Government Recognised Education Board; Document(s)/Certificate(s)/Testimonial(s) of essential qualification(s) and Experience Certificate(s).
f) Valid Caste Certificate (SC/ST/OBC), if applicable; Valid Non-Creamy Layer certificate, if
applicable; Valid Income and Asset Certificate to be produced by Economically Weaker Sections, if applicable; Valid Disability Certificate, if applicable; Valid Discharge Book/Service and Release Certificate for Ex-Servicemen (Pages containing Personal Particulars and Service Particulars), if applicable. No-Objection Certificate from concerned employer, in original, in case the applicant is working in any organization.
g) A set of self-attested photocopies of all applicable document(s)/certificate(s)/testimonial(s) as mentioned above.
- Candidate(s) without original document(s)/certificate(s)/testimonial(s) will not be allowed to appear in the Walk-in-Interview.
- Candidates meeting the eligibility criteria will only be allowed to appear in the Walk-in-Interview.
Selection Criteria:
a) The candidate will be selected based on Walk-in-Interview of total 100 marks.
b) The minimum qualifying marks will be 50 for all categories.
c) The breakup of 100 marks will be on, Professional Knowledge and skills (in concerned discipline), Professional Knowledge and skills (in allied discipline), Personal Attributes and Soft Skills.
d) Final selection from among the candidates who have appeared and secured the minimum qualifying marks of 50 in the Walk-in-Interview will be only on the basis of merit as per the marks obtained in the Walk-in-Interview.
Date & Time of Registration: 10/04/2023
9:00 A.M. to 11:00 A.M.
Date of Walk in Interview: 10/04/2023
Application Form
View Main Notification
Editors Note: Oil India Limited Chemist Oil India Limited Chemist Subscribe to Rasayanika for the latest chemistry and Pharma job openings, follow us on Facebook and Telegram and subscribe to our youtube channel for the latest updates on chemistry and Pharma jobs and much more.
