Cipla Ltd Safety Engineer Job – Chemical Engineering Candidates Apply
Dont forget to check out possible interview questions for this job below
Cipla Ltd announces job opening 2023, Safety Engineer job opening 2023. job opening 2022. Chemical engineering job opening 2023, Cipla ltd job opening 2023, degree in chemical engineering job opening 2023. Intrested and eligible candidates may check out all the details
Job Title: Safety Engineer (75170)
Location: India – Goa – Goa
Eligbility Criteria: Degree in Chemical Engineering with basic knowledge of powder safety hazards and chemical reactvity hazards
Relevant Work Experience
Minimum 3 years of experience in the industry out of which exposure to chemical / pharma industry for a minimum of 1-2 years as process engineer/operations engineer/process safety engineer
Job Purpose
Be responsible for maintenance of the process safety (major hazards) management system including HAZOP process documentation, trainings, management of change, quality of process safety incident investigation, CAPA actions and ensure that the learnings are imparted site wide.
Key Accountabilities (1/6)
- Process Safety Management System
- Ensure implementation of PSM systems at site/unit inline with global EHS standards
- Process Safety Standards Administration
Surveillance of gap analysis against the PSM Global stds and plan for implementation.
Be instrumental
Key Accountabilities (2/6)
Major Accident Hazard Assessment & Control
- Monitor compliance to risk assessments requirements and action completion and communicate compliance to management.
- Ensure driving the controls for raw risks in hierarchy of controls.
- Support as process safety team member for asset integrity programs.
- Monitor and demand for adequate HS1/HS2/HS3/HS4 data for all products handled at site/unit from process owners.
- Ensuring major accident hazard (MAH) risks are controlled to ALARP and involvement in decisions over the selection of the basis of safety for MAH control. This may involve input into the selection, installation and operation of equipment and inspection/maintenance considerations
- Ensure appropriate BPCS/IP/Reliefs are defined as part of controls in the risk assessment undertaken
Key Accountabilities (3/6)
- Process Safety SME
- Drive site level systems inline with global standards and Site EHS Stds.
- Contribute to submission of required data in ONSEP plan.
- Coordinate with competent third party to be engaged to carry out studies such as QRA/PSM audits etc.
Key Accountabilities (4/6)
Process Safety Culture & Capability
Help in gathering data for Process safety KPIs inline with global and Site KPIs.
Drive PSM competency building at site/unit by defining appropriate trainings for workforce.
Key Accountabilities (5/6)
Investigations & CAPA
- Ensure CAPA actions for incident investigation is driven by hierarchy of controls.
- Track CAPA for closure & effectiveness
- Ensure compliance to recommendations from audits, Investigations etc
Key Accountabilities (6/6)
Operational Role – Process Safety
- Conduct and lead recommended appropriate risk assessment tool for management of change.
- Escalate all high process risks to plant and EHS management immediately and help to define temporary controls in coordination with senior management.
- Conduct process safety internal audits to check availability of LIVE Process P&ID, LIVE HazOp completion of MoC actions, PSSR adequacy and other similar system adherence.
- Support the operations team on day to day on process safety issues.
Major Challenges - Driving process safety assessments which will depict LIVE risk status of the plant.
- Handling ambiguity when data is unavailable.
- Building competency of existing employees
- This will be overcome by
- Appropriate tools used for implementation such as RAM matrix to identify major hazards, KPI depiction of PSM Health.
- Empowering the PSM manager to escalate appropriate risk and work in consultation with Site Head. Site EHS Head and Functional head to arrive at appropriate acceptable risk.
Key Interactions (1/2)
- Process safety manager for regular updates and guidance
- Maintenance department heads for asset integrity related assignments.
- Production heads for driving PSM agenda and improvements
- Global Process Safey Lead for monthly review and seeking necessary guidance and support
- Vendors and service providers
Key Interactions (2/2)
ISO certification body- annually -for certification
Dimensions (1/2)
—1-Number of sites and –1-3—- number of units
–200-10000–Number of employees at site
–0—Number of direct and total reports
Dimensions (2/2)
Key Decisions (1/2)
Decision to start the campaign/commission the Plant
Finalisation of PSM training calendar for site/unit employees
Key Decisions (2/2)
Be firm to ensure that all required recommendations are completed before starting of the operations.
Trainings to be conducted role based rather than general topic for all employees and further to ensure on the job training.
Apply Online
Possible Interview Questions & Answers for the above job role:Â
- What are the main responsibilities of a Safety Engineer at Cipla LTD?
Answer: The Safety Engineer is responsible for maintaining the process safety management system, ensuring compliance with global EHS standards, delivering process safety trainings, monitoring risk assessments and controls, driving PSM competency building, investigating incidents and ensuring CAPA actions are taken, and conducting process safety internal audits.
2. What is the eligibility criteria for the Safety Engineer position?
Answer: The eligibility criteria for the Safety Engineer position is a degree in Chemical Engineering with basic knowledge of powder safety hazards and chemical reactvity hazards, and a minimum of 3 years of experience in the industry, out of which 1-2 years must be in the chemical/pharma industry as a process engineer, operations engineer or process safety engineer.
3. How will you ensure compliance with global PSM standards at the site/unit?
Answer: I will ensure compliance with global PSM standards at the site/unit by implementing PSM systems inline with the standards, conducting gap analysis against the PSM Global standards, delivering PSM trainings for each employee to build competency, coordinating with competent third party to carry out studies such as QRA/PSM audits, and contributing to submission of required data in ONSEP plan.
4. How will you handle ambiguity when data is unavailable for process safety assessments?
Answer: I will handle ambiguity when data is unavailable for process safety assessments by using appropriate tools such as RAM matrix to identify major hazards, KPI depiction of PSM Health, and escalating appropriate risks in consultation with Site Head, Site EHS Head, and Functional head to arrive at appropriate acceptable risk.
5. How will you ensure effective closure of CAPA actions for incident investigation?
Answer: I will ensure effective closure of CAPA actions for incident investigation by driving CAPA actions for incident investigation based on hierarchy of controls, tracking CAPA for closure and effectiveness, and ensuring compliance to recommendations from audits, investigations, etc.
Editors Note: Cipla Ltd Safety Engineer Subscribe to Rasayanika for the latest chemistry and Pharma job o penings, follow us on Facebook and Telegram and subscribe to our youtube channel for the latest updates on chemistry and Pharma jobs and much more.
