Chemistry High Salary Job Indian Space Research Organisation (ISRO) Centre’s/Units are engaged in Research and Development activities in the realm of Space Application, Space Science and Technology for the benefit of society at large and for serving the nation by achieving self-reliance and developing capacity to design and build Launch Vehicles and Communication/Remote Sensing Satellites and thereafter launch them.
Online applications are invited for direct recruitment to the posts of Scientist/Engineer-SD (Level 11 of the Pay Matrix) and Scientist/Engineer-SC (Level 10 of the Pay Matrix) at constituent ISRO Centres (Group-A Gazetted posts), as detailed below:
Job Title: Scientist/Engineer-SD
Post Code: 1510
No.of posts: 01
Center of posting: VSSC
Eligbility Criteria:Â
M.E/M.Tech in Chemical Engineering OR Chemical Technology
With B.E/B.Tech in Chemical Engineering OR Chemical and Electrochemical
Engineering OR Chemical Science & Technology OR Chemical Technology
Nature of Job:Â
Electro-chemical process development and its characterization for metallic coatings of Launch vehicle components.
_______________________________________________________________________
Post Code: 1512
No.of posts: 01
Center of posting: VSSC
Eligbility Criteria:Â
M.Sc. in Chemistry (General Chemistry) with B.Sc. in Chemistry with Mathematics and
Physics subjects as minors
Nature of Job:Â
i. Synthesis of new energetic materials such as organic high energy materials,
energetic metal complexes, etc. Characterization
materials.
ii. Design, development & processing of thermal protection systems, polymeric
adhesives, sealants, coatings, futuristic green propellant systems, rubber
products. Design of chemical synthesis processes and development of ceramic
matrix products
iii. Design & development of advanced energy systems such as Lithium based
battery cells, Supercapacitors & Supercapattery.
_____________________________________________________________________
Post Code: 1520
No.of posts: 10
Center of posting: VSSC
Eligbility Criteria:Â
B.E/B.Tech in Chemical Engineering OR Chemical and Electrochemical
Engineering OR Chemical Science & Technology OR Chemical Technology
Nature of Job:Â
i. Development of high energy propellants, process scale up and automation of
production operations for solid propellant motors.
ii. Quality assurance for energy systems for launch vehicles and spacecraft including
auditing of external work centers.
iii. Design and development of advanced energy systems including electrode
processing, configuring battery, cell assembly, etc.
iv. Process & Plant Design, Reaction Engineering, Design & Development of
Chemical Systems.
v. Activities related to solid motor production areas namely Qualification of raw materials,
processing, mixing, casting, disposal etc.
Note :
1. Those who possess the required qualification as on the last date of application (as on 21.07.2023) and those candidates who are going to complete the required qualification in the academic year 2022-23 are also eligible to apply, provided final degree is available by 31.08.2023 and their aggregate is 60% marks or CGPA 6.5/10 for ME/M.Tech course and 65% or CGPA 6.84/10 for B.E/B.Tech/M.Sc./ Course (average of all
semesters for which results are available).
2. M.E / M.Tech should be in First Class with an aggregate minimum of 60% marks (average of all semesters) or CGPA / CPI grading of a minimum of 6.5 on a 10 scale or equivalent.
3. B.E / B.Tech / M.Sc should be in First Class with an aggregate minimum of 65% marks (average of all semesters) or CGPA / CPI grading of a minimum of 6.84 on a 10 scale or equivalent.
4. B.Sc. should be in First Class with an aggregate minimum of 60% marks (average of all semesters) or CGPA / CPI grading of a minimum of 6.5 on a 10 scale or equivalent.
5. Essential qualification (ie Post Graduation / Graduation) should have been completed within the stipulated duration of the course as prescribed by the University. Where a University mentions both CGPA / CPI and percentage of marks in its Degree Certificate or Consolidated Mark sheet, then at least one criteria (either CGPA or percentage) should meet DOS/ISRO’s eligibility norms.
6. Where a University mentions only CGPA / CPI in its Degree Certificate or Consolidated marksheet, then the CGPA / CPI so mentioned should necessarily meet DOS/ISRO’s eligibility criteria. Conversion of CGPA / CPI into percentage of marks is not permitted to determine eligibility, regardless of whether any conversion formula is prescribed by the University/Institution concerned. The same criteria apply mutatis mutandis in
cases where only percentage of marks is mentioned in the Degree Certificate / Consolidated marksheet.
7. Candidates possessing Degrees awarded by foreign universities should produce the equivalency certificate issued by the Association of Indian
Universities (AIU), New Delhi, at the time of interview.
8. For Post Nos. 1503 to 1512, the Centre of Posting is VSSC. For Post Nos. 1513 to 1520, the vacancies are scattered across multiple Centres as indicated above. Therefore, the candidates applying against post Nos. 1513 to 1520 are required to provide their order of preference in the Centre of posting. However, the selected candidates are liable to be posted in any of the Centres/Units of the Indian Space Research Organisation / Department of Space situated anywhere in India as and when required.
9. Persons with Benchmark Disability (PWBD) can apply for the posts suitable to them even if the post is not identified for them. However, such
candidates will be considered for selection to such posts by general standard of merit. Persons suffering from not less than 40% of relevant
disability shall alone be eligible for the benefit of age relaxation as permissible under rules.
10. The above vacancies may vary depending upon the actual requirement.
11. DOS/ISRO reserves the right not to fill up any of the posts, if it so desires.
CLOSING DATE OF SUBMISSION OF ONLINE APPLICATION 21 July 2023,
Time: 1700 Hrs
TENTATIVE DATE OF WRITTEN TEST TO BE ANNOUNCED IN VSSC WEBSITE
Possible Interview Questions and Answers:
Question: Can you explain your experience or knowledge related to electro-chemical process development and its characterization for metallic coatings of launch vehicle components?
Answer: As a chemical engineering professional, I have had hands-on experience in researching and developing electro-chemical processes during my M.E/M.Tech studies. I also worked on characterizing metallic coatings for launch vehicle components during an internship, which provided valuable insights into the practical applications.
Question: How would you approach the synthesis and characterization of new energetic materials, and what relevant projects have you worked on in the past?
Answer: In my academic journey, I specialized in Chemistry, particularly focusing on energetic materials. I have been part of research projects that involved the synthesis and characterization of organic high-energy materials and energetic metal complexes. My experience in handling various analytical techniques has enabled me to assess their properties effectively.
Question: Can you elaborate on your expertise in the design and development of advanced energy systems, especially Lithium-based battery cells and Supercapacitors?
Answer: During my studies, I gained extensive knowledge in energy systems, particularly in the design and development of Lithium-based battery cells and Supercapacitors. I collaborated on projects where we optimized electrode processing, cell assembly techniques, and worked on enhancing energy storage capacity.
Question: Describe your experience in quality assurance for energy systems in launch vehicles and spacecraft. How do you ensure the efficiency and reliability of these systems?
Answer: I have been involved in quality assurance during my B.E/B.Tech studies. I contributed to auditing external work centers and conducting thorough inspections to ensure compliance with stringent standards. Implementing robust testing protocols and continuous improvement measures were key in maintaining the efficiency and reliability of energy systems.
Question: In the field of Chemical Engineering, what areas have you specialized in, and how do you envision applying your skills to develop high-energy propellants and solid motor production processes?
Answer: My specialization during my B.E/B.Tech studies included Process & Plant Design and Reaction Engineering. I believe my expertise in these areas aligns well with the development of high-energy propellants and solid motor production processes. I am eager to optimize production operations and contribute to the continuous improvement of these critical components.
Click Here To Apply Online
View Main Notification
Chemistry High Salary Job, Chemistry High Salary Job Looking for latest chemistry and Pharma job openings, follow Rasayanika Facebook and Telegram and subscribe to our youtube channel for the latest updates on chemistry and Pharma jobs and much more
